Zhuohang Precision Machining Factory

Frequently Asked Questions

CNC machining center workshop, Zhuohang Precision Machining Factory, Dongguan, China

Frequently Asked Questions — The questions buyers actually ask about 4-axis CNC machining — design for manufacturability, tolerances, materials,. Tolerances: ±0.003 mm milling, ±0.002 mm turning — ISO 9001 / IATF 16949 verified.

The questions buyers actually ask about 4-axis CNC machining — design for manufacturability, tolerances, materials, MOQ, lead times, certifications, and what it takes to get a quote.

What is design for manufacturability, and why does it matter?

Design for manufacturability (DFM) is designing a part so its geometry, tolerances, and material are straightforward to machine. A drawing that ignores DFM costs more and yields worse, because features like sharp internal corners, thin walls, or over-tight tolerances force extra setups and slower feeds.

What tolerances can you hold?

±0.003 mm on CNC milling, ±0.002 mm on CNC turning, and ±0.002 mm for precision grinding. Critical dimensions are verified on Hexagon CMMs, with process capability Ppk ≥ 1.67 at the initial study on key characteristics and ≥ 1.33 on general characteristics.

Which materials do you machine?

Aluminum, stainless steel, carbon and alloy steel, brass, copper, titanium alloy, and engineering plastics. Incoming lots are XRF-checked against the mill certificate before machining, so the grade you specify is the grade you receive.

What is the minimum order quantity?

The MOQ is 1 piece. Prototype, single-part, and production orders run on the same machines and to the same tolerances, so what you validate on one part is what you receive in volume.

What are the lead times?

Roughly 3, 7, or 30 days depending on part complexity and the number of process steps. Simple parts ship in about 3 days; parts with many operations or surface finishing land in the 30-day tier.

Which machining processes run in-house?

3-axis, 4-axis, and 5-axis milling, CNC turning, mill-turn, and precision grinding all run in one 6,800 m² facility. Most parts never leave the building between operations, which shortens lead time and keeps one supplier accountable.

Are you certified?

Yes — ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En), and ISO 14001:2015 (116024/B/0001/UK/En), each with a number you can check with the registrar. The IATF scope excludes product design under Clause 8.3.

Can you bundle surface finishing and heat treatment?

Yes — anodizing, plating, powder coating, painting, brushing, polishing, deburring, and heat treatment can be bundled so you receive finished parts rather than bare machined blanks. Titanium stress relief above 500 °C goes to a qualified partner.

How do I get a quote, and is the DFM review free?

The DFM review is free before the order and expensive after it. Email a STEP or IGES model plus a 2D drawing, material, and quantity to [email protected], and you get a DFM review and a quote, usually within one business day.

How do I verify the parts match the drawing?

CMM inspection reports, SPC charts, and material certificates ship with your parts as documented evidence of what you received. On a representative characteristic, our SPC shows Ppk ≥ 1.67 at the initial study on key characteristics.

Read the tolerance band before you read the index. Cpk is a ratio of the tolerance band to the process spread, not an absolute measure of accuracy. The figure above was recorded on a length characteristic with a 0.4 mm band (76.1–76.5 mm) — wide by design. Hold the same process spread against a ±0.005 mm feature and it fails outright. Ask for the band, the subgroup count and the sampling window on every capability number a supplier quotes.

Which materials and industries do you cover?

We machine aluminum, stainless steel, titanium, brass, copper, and Inconel, plus engineering plastics including PEEK and Delrin. These 4-axis CNC machined parts go into medical, aerospace, automotive, robotics, electronics and defense applications, with the inspection, traceability and documentation each sector requires before it places an order.

What buyers ask most

Three questions come up on nearly every enquiry. What is the minimum order? One piece - a single prototype can be machined, checked and iterated before any volume is committed. What is the lead time? Roughly 3 / 7 / 30 days depending on the material and the documentation scope, from a simple aluminium part to a full first-article package. What tolerances can you hold? ±0.003 mm milled and ±0.002 mm turned, verified on a Hexagon CMM, with Ppk 1.67 or better initial and Cpk 1.33 or better in production on critical characteristics. The answers are short because the capability is specific, not vague.

The answers behind the answers

The plant behind these answers is Dongguan Zhuohang Ltd - 6,800 m² in Hengli Town, Dongguan, 100+ CNC machines including Mazak VARIAXIS I-600 and INTEGREX I-250H S, and certification to ISO 9001:2015, IATF 16949:2016 and ISO 14001:2015 with the certificate numbers published and verifiable. The service area covers Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa, with worldwide shipping from Dongguan. Contact Felipe Iglesias at [email protected] or +86 13126536955 with a drawing and a quantity for a specific answer to your specific part.

How to verify the claim in one email

The fastest way to separate a real floor from a brochure is to ask for the machine list and the certificate numbers - and this facility answers in one email. Dongguan Zhuohang Ltd operates 100+ CNC machines across 6,800 m² in Hengli Town, Dongguan: Mazak VARIAXIS I-600 five-axis, INTEGREX I-250H S mill-turn, Brother SPEEDIO, and TSUGAMI, STAR and CITIZEN Swiss lathes. Inspection is on a Hexagon CMM with the 10:1 gauge rule, certification is to ISO 9001:2015, IATF 16949:2016 and ISO 14001:2015, and critical characteristics run at Ppk 1.67 initial and Cpk 1.33 in production.

Worldwide buyers across Europe, the Americas, Asia, Oceania and Africa are supplied from Dongguan. MOQ is 1 piece, lead times run roughly 3 / 7 / 30 days, and the quote from Felipe Iglesias ([email protected], +86 13126536955) comes back with the routing and the capability evidence together.

Take the next step

One drawing and one quantity is the whole hand-off. Send a STEP or IGES model and a 2D drawing with the tolerances, datums, material grade and finish, state the quantity and lead time, and the reply is an itemised quote - material, setup, cycle time, inspection - rather than a round number. If the drawing is incomplete, send what you have and the open questions; the point is to open the conversation, not to wait for a perfect package.

Contact Felipe Iglesias at [email protected] or +86 13126536955. MOQ is 1 piece, lead times run about 3 / 7 / 30 days, and the service area covers Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa, shipped worldwide from Dongguan.

Tolerance and surface finish reference

±0.003 mm milled, ±0.002 mm turned, and ±0.002 mm ground or wire-cut, all verified on a Hexagon CMM against the datum scheme. Surface finishes span Ra 0.8 to 3.2 µm as-milled, Ra 0.2 to 0.4 µm ground, and Ra 0.05 to 0.1 µm polished. The 10:1 gauge rule governs every feature - the instrument must resolve ten times finer than the tolerance it checks. And the datum is what makes the tolerance real: read against two different datums, the same callout gives two different parts, so state the datum and the convention, ASME Y14.5 or ISO.

De-risking a first order

Start with a handful of parts to confirm the routing and the tolerance, then scale. The same machines, the same inspection bench and the same certificate numbers apply to a single piece and a production run alike, so a small first batch is the proof that a large one will hold the same numbers.

What this shop actually runs

We machine every part in our own 6,800 m² plant in Dongguan, China, on 100+ CNC machines with 100+ staff. The machine list by category:

  • 5-axis machining centres (10+) - Mazak VARIAXIS I-600 (510/910/510 mm travel, 12,000 rpm, 22 kW, 71.6 N·m, 30-tool BT40) and Mazak INTEGREX I-250H S (B-axis 0.0001°, 24 kW, 124 N·m, 38-tool HSK-A63). Cut on compound-angle parts, single-setup multi-face prismatic work, and aerospace fittings where datum transfer loss is unacceptable.
  • 3-axis / 4-axis machining centres (50+) - Brother SPEEDIO S500Z2N / S700Z2N (10,000 rpm, 14/21-tool ATC, 0.7 s tool-to-tool, Z-axis 2.2 G) and Mazak VCE-430A L / VCE-570C L (10,000 rpm, 118 N·m, 24-tool ATC). Cut on prismatic parts, plates, brackets, housings.
  • Swiss-type turning centres (10+) - Citizen Cincom A20-3F7 (Φ20 mm, 10,000 rpm), TSUGAMI B0206-III / B0205-III (Φ20 mm, 0.1 µm), STAR SR-32JII / SR-32J Type N (Φ32 mm, 8,000 rpm). Cut on long, slender rotational parts at ±0.002 mm.
  • CNC turning centres (20+) - HEADMAN T70M/1250 (720 mm swing, 117 mm bore, 3,000 rpm, BMT75 12-station turret). Cut on shafts, bushings, flanges up to ±0.002 mm.
  • Wire EDM (5+) - Sodick AQ535L (550/350/300 mm travel, ±20° taper, 800 kg workpiece). Cut on hardened tool steel, internal splines, sharp internal corners that milling cannot reach.
  • Inspection: Hexagon CMM + 20+ gauges - Hexagon CMM for coordinate measurement, plus vision system, profilometer, hardness tester, coating thickness gauge, XRF for material verification. The 10:1 rule (gauge 10x more accurate than the band) is applied to every feature.
  • Machine highlights - VARIAXIS I-600: one-setup multi-face 5-axis + MAZA-CHECK auto-calibration; INTEGREX I-250H S: DONE-IN-ONE mill-turn, B-axis 0.0001° + Ai thermal shield; SPEEDIO S500Z2N / S700Z2N: Z-axis 2.2 G + 0.7 s ATC; Swiss-type: guide-bush switchable + 0.1 µm resolution.

Tolerance: ±0.003 mm CNC milling / ±0.002 mm CNC turning / ±0.002 mm grinding and wire EDM. Capability: Ppk >= 1.67 initial on key characteristics, Cpk >= 1.33 ongoing.

Certificates: ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, with design clause 8.3 excluded, stated openly) and ISO 14001:2015 (116024/B/0001/UK/En), issued to Dongguan Zhuohang Ltd, registration 91441900MA4UWT6X39, founded 2005.

Where we ship: Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — plus other countries and regions worldwide, shipped from our base in Dongguan, China.

Contact: Felipe Iglesias, [email protected], +86 13126536955.

Have a question the FAQ didn't cover?

Email [email protected] or call +86 13126536955.

Frequently Asked Questions

1. What is design for manufacturability, and why does it matter?

In short, Design for manufacturability (DFM) is designing a part so its geometry, tolerances, and material are straightforward to machine. A drawing that ignores DFM costs more and yields worse, because features like sharp internal corners, thin walls, or over-tight tolerances force extra setups and slower feeds.

2. What tolerances can you hold?

±0.003 mm on CNC milling, ±0.002 mm on CNC turning, and ±0.002 mm for precision grinding. Critical dimensions are verified on Hexagon CMMs, with process capability Ppk ≥ 1.67 at the initial study on key characteristics and ≥ 1.33 on general characteristics.

3. Which materials do you machine?

Aluminum, stainless steel, carbon and alloy steel, brass, copper, titanium alloy, and engineering plastics. Incoming lots are XRF-checked against the mill certificate before machining, so the grade you specify is the grade you receive.

4. What is the minimum order quantity?

The MOQ is 1 piece. Prototype, single-part, and production orders run on the same machines and to the same tolerances, so what you validate on one part is what you receive in volume.

5. What are the lead times?

Roughly 3, 7, or 30 days depending on part complexity and the number of process steps. Simple parts ship in about 3 days; parts with many operations or surface finishing land in the 30-day tier.

6. Which machining processes run in-house?

3-axis, 4-axis, and 5-axis milling, CNC turning, mill-turn, and precision grinding all run in one 6,800 m² facility. Most parts never leave the building between operations, which shortens lead time and keeps one supplier accountable.

7. Are you certified?

Yes — ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En), and ISO 14001:2015 (116024/B/0001/UK/En), each with a number you can check with the registrar. The IATF scope excludes product design under Clause 8.3.

8. Can you bundle surface finishing and heat treatment?

Yes — anodizing, plating, powder coating, painting, brushing, polishing, deburring, and heat treatment can be bundled so you receive finished parts rather than bare machined blanks. Titanium stress relief above 500 °C goes to a qualified partner.

9. How do I get a quote, and is the DFM review free?

The DFM review is free before the order and expensive after it. Email a STEP or IGES model plus a 2D drawing, material, and quantity to [email protected], and you get a DFM review and a quote, usually within one business day.

10. How do I verify the parts match the drawing?

In short, CMM inspection reports, SPC charts, and material certificates ship with your parts as documented evidence of what you received. On a representative characteristic, our SPC shows Cpk = 1.851 (one characteristic on one part, not a blanket capability claim) against an initial-study target of ≥ 1.67.

11. Which materials and industries do you cover?

In short, We machine aluminum, stainless steel, titanium, brass, copper, and Inconel, plus engineering plastics including PEEK and Delrin. These 4-axis CNC machined parts go into medical, aerospace, automotive, robotics, electronics and defense applications, with the inspection, traceability and documentation each sector requires before it places an order.

What payment methods and terms do you accept?

PayPal, Western Union, and bank or wire transfer. For long-term customers we also accept Net 30, Net 45, and Net 60 terms after an approved credit review.

What happens if a machined part has a manufacturing defect?

We provide free repair or remake for parts with manufacturing defects. All repair and remake costs, including return and shipping, are on us.

How quickly do you respond to inquiries?

We respond to every inquiry within 24 hours. Quotations for standard parts are returned within 48 hours; print reviews and DFM feedback are usually back within one business day.

Standards referenced on this page

  • ASTM B348/B348M-21 — Standard Specification for Titanium and Titanium Alloy Bars and Billets
  • ASTM B211/B211M-19 — Standard Specification for Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
  • ISO 9001 — Quality management systems — Requirements