Zhuohang Precision Machining Factory

Zhuohang Precision Machining Factory

Provenance is the cheapest check you can run on a CNC machining supplier. Zhuohang Precision Machining Factory, also known as Dongguan Zhuohang Ltd, is a 6,800 m² CNC plant in Hengli, Dongguan, China, operating since 2005. ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En) and ISO 14001:2015 (116024/B/0001/UK/En) are issued to Dongguan Zhuohang Precision Technology Co., Ltd.; design and development is excluded from the IATF scope under clause 8.3. Ask for the dimensional report and material certificate from the first lot before you scale up.

A single quality system covers prototype lots and production runs alike, on the same equipment.

What the factory is

The floor below is where your precision parts are machined, inspected and shipped. The 4 Axis CNC Machining shop floor is a 6,800 m² facility in Hengli Town, Dongguan, staffed by more than 100 people. Turning, milling and production runs all happen under one roof — machining, inspection, finishing and shipping in a single line — which is why lead times and quality stay under control instead of being handed down a chain of subcontractors.

Facility at a glance

ItemDetails
Floor area6,800 m²
Team100+ (machinists, programmers, inspectors, project engineers)
CNC equipment100+ machines — Mazak, Brother, TSUGAMI and Sodick families
Milling / turning tolerance±0.003 mm (milling) / ±0.002 mm (turning)
Precision grinding±0.002 mm
InspectionHexagon CMMs, XRF material verification, surface and hardness testers
Rooftop solar array installed across the main production building at the Zhuohang plant in Dongguan, China.
Rooftop solar array on the main production building, Dongguan, China.

Machining and inspection equipment

Milling runs on Brother SPEEDIO and Mazak vertical machining centers; turning on Mazak multi-tasking, Citizen, Star and Tsugami Swiss-type lathes; grinding on surface, centerless and cylindrical machines. Every critical dimension is verified on CMM rather than trusted on paper, and incoming material is XRF-checked against its mill certificate so alloy substitution is caught at the door.

The legal entity behind the factory

Zhuohang Precision Machining Factory facility exterior in Dongguan, China.

You can source from a precision CNC machine shop in Dongguan that has been running since 2005. The legal entity on your invoices is Dongguan Zhuohang Ltd, and our registered trade name is Zhuohang Precision Machining Factory. Long-term customers may still know us as Zhuohang Precision Machining Factory — the original name on their earliest contracts and NDAs.

Visit the factory

You are welcome to tour the floor in person or join a live video walkthrough before you order. Email [email protected] or call +86 13126536955 to arrange a visit or a walkthrough of the equipment before you place an order.

How to verify the claim in one email

Our factory exterior in Hengli, Dongguan.
Our facility in Hengli, Dongguan — 6,800 m², 100+ CNC machines.

The fastest way to separate a real floor from a brochure is to ask for the machine list and the certificate numbers - and this facility answers in one email. Dongguan Zhuohang Ltd operates 100+ CNC machines across 6,800 m² in Hengli Town, Dongguan: Mazak VARIAXIS I-600 five-axis, INTEGREX I-250H S mill-turn, Brother SPEEDIO, and TSUGAMI, STAR and CITIZEN Swiss lathes. Inspection is on a Hexagon CMM with the 10:1 gauge rule, certification is to ISO 9001:2015, IATF 16949:2016 and ISO 14001:2015, and critical characteristics run at Ppk 1.67 initial and Cpk 1.33 in production.

Worldwide buyers across Europe, the Americas, Asia, Oceania and Africa are supplied from Dongguan. MOQ is 1 piece, lead times run roughly 3 / 7 / 30 days, and the quote from Felipe Iglesias ([email protected], +86 13126536955) comes back with the routing and the capability evidence together.

What this shop actually runs

ISO 9001:2015 certificate issued to Dongguan Zhuohang Ltd, certificate number 116024/A/0001/UK/En.IATF 16949:2016 certificate issued to Dongguan Zhuohang Ltd, certificate number 131941/A/0001/SM/En, with design clause 8.3 excluded.ISO 14001:2015 certificate issued to Dongguan Zhuohang Ltd, certificate number 116024/B/0001/UK/En.
Certificates issued to Dongguan Zhuohang Ltd: ISO 9001:2015 (116024/A/0001/UK/En) · IATF 16949:2016 (131941/A/0001/SM/En, design clause 8.3 excluded) · ISO 14001:2015 (116024/B/0001/UK/En).

We machine every part in our own 6,800 m² plant in Dongguan, China, on 100+ CNC machines with 100+ staff. The machine list by category:

  • 5-axis machining centres (10+) - Mazak VARIAXIS I-600 (510/910/510 mm travel, 12,000 rpm, 22 kW, 71.6 N·m, 30-tool BT40) and Mazak INTEGREX I-250H S (B-axis 0.0001°, 24 kW, 124 N·m, 38-tool HSK-A63). Cut on compound-angle parts, single-setup multi-face prismatic work, and aerospace fittings where datum transfer loss is unacceptable.
  • 3-axis / 4-axis machining centres (50+) - Brother SPEEDIO S500Z2N / S700Z2N (10,000 rpm, 14/21-tool ATC, 0.7 s tool-to-tool, Z-axis 2.2 G) and Mazak VCE-430A L / VCE-570C L (10,000 rpm, 118 N·m, 24-tool ATC). Cut on prismatic parts, plates, brackets, housings.
  • Swiss-type turning centres (10+) - Citizen Cincom A20-3F7 (Φ20 mm, 10,000 rpm), TSUGAMI B0206-III / B0205-III (Φ20 mm, 0.1 µm), STAR SR-32JII / SR-32J Type N (Φ32 mm, 8,000 rpm). Cut on long, slender rotational parts at ±0.002 mm.
  • CNC turning centres (20+) - HEADMAN T70M/1250 (720 mm swing, 117 mm bore, 3,000 rpm, BMT75 12-station turret). Cut on shafts, bushings, flanges up to ±0.002 mm.
  • Wire EDM (5+) - Sodick AQ535L (550/350/300 mm travel, ±20° taper, 800 kg workpiece). Cut on hardened tool steel, internal splines, sharp internal corners that milling cannot reach.
  • Inspection: Hexagon CMM + 20+ gauges - Hexagon CMM for coordinate measurement, plus vision system, profilometer, hardness tester, coating thickness gauge, XRF for material verification. The 10:1 rule (gauge 10x more accurate than the band) is applied to every feature.
  • Machine highlights - VARIAXIS I-600: one-setup multi-face 5-axis + MAZA-CHECK auto-calibration; INTEGREX I-250H S: DONE-IN-ONE mill-turn, B-axis 0.0001° + Ai thermal shield; SPEEDIO S500Z2N / S700Z2N: Z-axis 2.2 G + 0.7 s ATC; Swiss-type: guide-bush switchable + 0.1 µm resolution.

Tolerance: ±0.003 mm CNC milling / ±0.002 mm CNC turning / ±0.002 mm grinding and wire EDM. Capability: Ppk >= 1.67 initial on key characteristics, Cpk >= 1.33 ongoing.

Certificates: ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, with design clause 8.3 excluded, stated openly) and ISO 14001:2015 (116024/B/0001/UK/En), issued to Dongguan Zhuohang Ltd, registration 91441900MA4UWT6X39, founded 2005.

Where we ship: Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — plus other countries and regions worldwide, shipped from our base in Dongguan, China.

Contact: Felipe Iglesias, [email protected], +86 13126536955.

Frequently asked questions

What is the minimum order quantity?

One piece. Machining starts at a single part, so geometry and tolerance can be proven at the stage where a mistake costs one component rather than a full batch, and the same machines carry the part into volume without re-qualification.

What tolerances can the shop hold?

±0.003 mm on CNC milling, ±0.002 mm on CNC turning, and ±0.002 mm on precision grinding and wire EDM. Critical dimensions are verified on Hexagon CMMs, and capability is reported per characteristic: every report names the feature, its tolerance band, the sample size, the sigma method and the study window.

Which quality certifications does the factory hold?

ISO 9001:2015 (certificate 116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, with product design excluded under Clause 8.3) and ISO 14001:2015 (116024/B/0001/UK/En). Each certificate number can be checked against the registrar's records.

How quickly will I receive a quotation?

Typically within 48 hours. Send a STEP or IGES model together with a 2D drawing that states material, tolerances and surface finish, and the quote returns with a DFM review and a tier that reflects the real number of setups, operations and finishing steps.

Which languages does the team reply in?

Replies come in 7 languages — English, Japanese, Portuguese, Spanish, French, Chinese and Cantonese, so a drawing marked up in Osaka, Stuttgart or São Paulo comes back answered in the language it was sent in.

Where is the factory, and how large is it?

No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470. The plant covers 6,800 m² with more than 100 staff and has been machining since 2005. Machining, inspection, finishing and shipping all happen under one roof.

Standards referenced on this page

  • ASTM A582/A582M-12 — Standard Specification for Free-Machining Stainless Steel Bars
  • ISO 9001 — Quality management systems — Requirements
  • ASTM E8/E8M-21 — Standard Test Methods for Tension Testing of Metallic Materials